The MistKing Advanced Misting System v4.0 with a 3/8" Backbone is a significantly more powerful system than the starter or ultimate. Unless you're going to exceed 20 nozzles, we do not recommend upgrading to this misting system. This system features a pump capable of pressures up to 125psi. Supports from 10 to 70+ nozzles of your choice. Actual number of nozzles depends on the complexity of the system. Pump can run continuously for hours at a time, EVEN DRY! These pumps are manufactured specifically for MistKing and are very robust.
This is the 4th generation MistKing system which includes the new seconds timer.
The MistKing Advanced Misting System v4.0 includes
- Large capacity diaphragm pump with 3/8" fittings.
- 24V Power adapter - 110V (CE and cUL listed)
- 3/8" reservoir bulkhead with plug
- 3/8" Ball Valve
- 35 feet of 1/4" black opaque tubing (to connect nozzles)
- 15 feet of 3/8" black opaque tubing (to connect reservoir to pump and run nozzle 3/8" backbone)
- 12 Value "T" Misting Assemblies
- 3 Value "L" Misting Assemblies
- 2 Reducing Tee Connections (3/8" to 1/4")
- 1 Reducing Elbow Connections (3/8" to 1/4")
- 20 1/4" Tubing Clips
- 10 3/8" Tubing Clips
- Seconds timer ST-24
- Installation instructions
This kit can be used as is, just get a suitable size reservoir. If you intend to use more nozzles, we recommend extending the 3/8" tubing backbone and adding some extra Reducing Tee connections and then splitting into 1/4" lines that will feed the individual misting assemblies. Alternatively you can use a 7 port manifold fed by 3/8" tubing or a combination of both.
We suggest using this kit as the backbone for a custom misting system. Just add parts, nozzles, tubing and expand on this work horse. If you need help designing a system that will fit your particular situation, please contact us. Hobbyists and zoos run their entire animal rooms based on this kit or multiple kit.